37
Q1, Q2
binary outputs
A1, A2, A3_MUX…A6_MUX
analogue inputs
FS1_ups, FS1_gprs
system trigger inputs
TMR1, TMR2
timer trigger inputs
Default value
-
n/a
Comments
-
more about trigger inputs and flags in chapter Appendices
7.2.6.1.2.2. Trigger flag
Function
-
defines event-triggering flag associated with selected
trigger input
Data type
- selection
list
Range
-
n/a
rule inactive
Bi In 0->1, Bi In 1->0
binary input state change
Counter
counter flip over (up or down)
An LoLo, An Lo, An Hi, An HiHi
alarm threshold flags for analogue inputs signals
Default value
-
n/a
Comments
-
more about trigger inputs and flags in chapter Appendices
7.2.6.1.2.3. SMS text
Function
-
allows entering text sent in message triggered by defined
rule
Data type
- text
Range
-
letters, numerals, special characters - max. length: 160
characters
Default value
- .
Comments
-
if the message will include the status of the module, total
length of SMS text and the status may not exceed 160
characters. If the length is greater, the text will be
truncated so that full status is sent.
7.2.6.1.2.4. Recipient number
Function
- selects
message
recipient number
Data type
- selection
list
List
- friendly names of recipients associated with phone
numbers in Authorized numbers list
Default value
-
NUM 1 - first number on the list
Comments
-
since recipient's phone number is selected from the list of
friendly names, it is important to enter unique,
unambiguous names facilitating identification.
