Inventec P47 series, Service Manual

Page: 48 / 129

Hardware Operations
2017-MNU-000016
2-18
Align the notch on the DIMM to the break on the socket. Carefully insert the DIMM into the
socket until the retaining clips snap back in place.
Figure 2-11 Inserting the DIMM into the Socket
DIMMs fit in only one direction. DO NOT force a DIMM into the socket to avoid
damaging the DIMM.
2.9
Power Supplies
This server is designed with single 1600W/2000W power supply or two 1600W/2000W
redundant power supplies with system throttling mode.
The location of power supplies on the server is shown below:
Figure 2-17 Power Supply Locations