VoverlaX User Manual
Page 4
Version 1.0.0.2
When device driver has been installed properly, Windows will have a pop-up message box at the
lower right corner of the screen:
Please note: after re-installing MS Windows on a PC with
VoverlaX
card remaining seated in
PCIe slot, one “
Other PCI Bridge Device
” or similar line will appear in the Windows’
ControlPannel->System->Hardware->DeviceManager
window under the “
Other devices
”
category:
preceded by a yellow exclamation mark circle, since
Windows will not(cannot) install the device driver software. This item will need “update driver”
operation(right-mouse click then select “Update Driver Software…”) to install the proper driver
software from the “
drv
” folder on the Setup CD, before the
VoverlaX
card and application
software can be used properly.
5.3 To install the application software, click “
Next”
on the “Welcome to the VoverlaX Setup Wizard”
window --- which normally starts up automatically after inserting the set-up CD, or will appear after
double-clicking the “
Start.bat
” software on the set-up CD (there might be a vc++2008
Redistributable installation and a .Net Framework 3.5 installation preceding this Wizard window if
these two software have not been installed already):
.
,
then follow the on-screen instructions to install the application software.
5.4 To remove the installed software, run “Uninstall.exe” from the
VoverlaX
program group.
6. Starting the Software
After a successful application software installation, a “
VoverlaX.EXE
” shortcut icon
will appear
on the Windows’ desktop. Mouse double-clicking this icon will start the software. The software can also
be started from Window’s “Start->Program Files->Inventa->VoverlaX” group.
7. Operate VoverlaX Card
Once started,
VoverlaX
will display its main window: