Invenco G6 OPT 6500x, Installation Manual

Page: 5 / 40

Invenco Group Limited Proprietary & Confidential
2 Safety & Compliance Information
This section introduces the hazards and safety precautions associated with installing, inspecting,
maintaining or servicing this product. Before performing any task on this product, read this safety
information and the applicable sections in this manual, where additional hazards and safety
precautions for your task will be found. Fire, explosion or electrical shock could occur and cause
death or serious injury if these safe service procedures are not followed.
2.1 Preliminary Precautions
You are working in a potentially dangerous environment of flammable fuels, vapours, and high
voltage. Only trained or authorized individuals knowledgeable in the related procedures should
install, inspect, maintain or service this equipment.
2.2 Emergency Total Electrical Shut-Off
The first and most important information you must know is how to stop all fuel flow to the pump and
island. Locate the switch or circuit breakers that shut-off all power to all fuelling equipment and
dispensing devices.
2.3 Total Electrical Shut-Off Before Access
Any procedure requiring access to electrical components or the electronics of a pump/dispenser
requires total electrical shut-off of that unit. Know the function and location of this switch or circuit
breaker before inspecting, installing, maintaining, or servicing.
2.4 Evacuation, Barricading and Shut-Off
Any procedures requiring accessing a pump/dispenser head requires the following three actions:
•
An evacuation of all unauthorized persons and vehicles
•
Using safety tape or cones as barricades to the effected units
•
A total electrical shut-off of that unit
2.5 Read the Manual
Read, understand and follow this manual and any other labels or related materials supplied with this
equipment. If you do not understand a procedure, call an Invenco Authorized Service Contractor. It
is imperative to your safety and the safety of others to understand the procedures before beginning
work.
2.6 Follow the Regulations
There is applicable information in OSH regulations; and national, state, and local codes which must
be followed. Failure to install, inspect, maintain or service this equipment in accordance with these
codes, regulations and standards may lead to legal citations with penalties or affect the safe use
and operation of the equipment.
2.7 Replacement Parts
Use only genuine Invenco replacement parts and retrofit kits on your installation. Using parts other
than genuine Invenco replacement parts could create a safety hazard and violate local regulations.