Part No. 1114809
55
TDX WHEELCHAIRS
SECTION 7
BATTERIES
BATTERIES
INSTALLING BATTERIES INTO WHEELCHAIR (FIGURES 4 AND 5)
NOTE: Positioning of the batteries is completed with battery tray position in wheelchair and
partially pulled out. Refer to FIGURE 2 for full view of chair. Illustrations in FIGURE 4 are shown
without the chair for clarification purposes only.
1. Perform the following to install batteries onto the battery tray. (FIGURE 2)
A. Position the battery with battery connector bracket in the
rear
of the battery
tray in the orientation as shown.
NOTE: Orientation of the battery is critical otherwise batteries will not
connect to the controller or each other.
NOTE: Front of battery tray is designated by the battery stop. Rear of the battery tray
is the opposite end.
B. Position the remaining battery in the
front
of the battery tray in the orientation
shown so that the wiring harnesses can be connected together.
2. Connect front battery to rear
battery.
3. Connect battery straps.
4. Slide the battery tray into the
chair.
STEPS 1B AND 2
FIGURE 4 - INSTALLING BATTERIES INTO THE WHEELCHAIR
STEP 3
Connect front battery
to the rear battery HERE
Rear Battery
Battery
Straps
Front Battery
Battery Tray
Rear
STEP 1A
Battery with
Battery Connector
Bracket
Battery Tray
Front
Battery
Stop
All manuals and user guides at all-guides.com
