Invacare® Storm®⁴ Series
1.
Use the spanner to loosen the screw (1).
2.
Adjust to the desired length.
3.
Re-tighten the screw.
5.18.4
Adjusting the depth of the calf pad
The depth of the calf pad can be adjusted via the holding plate. The
holding plate hole combinations allow 5 different depth settings.
Tools:
•
10 mm open-ended spanner
1.
Use the open-ended spanner to loosen the nut (1) and remove.
2.
Adjust to the desired depth. Please observe that the round holes
are intended for the calf pad retaining screw and the oblong
holes for the aglet without thread.
3.
Screw the nut back on and tighten.
5.18.5
Adjusting the height of the calf pad
Tools:
•
4 mm Allen key
1.
Use the Allen key to loosen the screws (1).
2.
Adjust to the desired position.
3.
Re-tighten the screws.
5.18.6
Unlocking and swivelling the calf pad backward
when alighting
1.
Press the calf pad straight down.
2.
70
1529686-R
Summary of Contents for Storm4 True Track Plus
Page 109: ...Notes...
