Invacare® Storm®⁴ Series
5.6.2
Manual
The seat angle is adjusted using an adjusting mechanism, which
consists of 2 perforated strips which can be pushed against each
other. The adjusting mechanism is at the front under the seat frame.
When adjusting the seat angle, ensure that both fixing screws are
always used to fix the adjusting mechanism!
Activate the motor brakes (engage motor) before adjusting
the seat angle.
Only adjust the seat angle manually if nobody is sitting in
the seat.
Tools:
•
6 mm Allen key
1.
Switch the power supply off (ON/OFF key).
2.
Unscrew Allen screws (1).
3.
Adjust the seat angle by raising or lowering the seat.
4.
Insert the Allen screws again and tighten.
5.7
Adjusting the backrest
CAUTION!
Adjusting the seat tilt or the backrest angle
changes the geometry of the mobility device and
directly influences its dynamic stability!
–
For details regarding dynamic stability, negotiating
gradients and obstacles and the correct adjustment
of seat tilt or backrest angle, refer to 6.5 Taking
Obstacles, page 74 and Driving up and down gradients.
5.7.1
Electrical
Consult the user manual for your remote for information about
electrical adjustment.
5.7.2
Adjusting the backrest (standard seat) —
manually with handscrews
42
1529686-R
Summary of Contents for Storm4 True Track Plus
Page 109: ...Notes...