Invacare Storm4 True Track Plus User Manual Download

Page: 107 / 110

Technical data

Dimensions in accordance with
ISO 7176–15

Seat type

RECARO

Optimist

Modulite

Legrest angle

•

0° … 75°

•

0° … 75°

Seat angle, electrical adjustment

•

0° - 25°

Seat angle, manual adjustment

•

0° - 9°

Weight

Curb weight

•

at least 174 kg

Component weights

Batteries

•

approx. 24.5 kg per battery

Payload

Max. payload

•

150 kg

Axle loads

Max. front axle load

•

200 kg

Max. rear axle load

•

300 kg

IPX4 classification means that the electrical system is protected against spray water.

Static stability according to ISO 7176-1 = 9° (15.8 %)

Dynamic stability according to ISO 7176-2 = 6° (10.5 %)

1529686-R

107

Summary of Contents for Storm4 True Track Plus















































































































Search results

Summary of Contents for Storm4 True Track Plus

Reviews:

Related manuals for Storm4 True Track Plus

Brands by name

Popular brands

Invacare Storm4 True Track Plus, User Manual

Search results

Summary of Contents for Storm4 True Track Plus

Reviews:

Related manuals for Storm4 True Track Plus

Brands by name

Popular brands