Adjusting the mobility device to the user's seating posture
5.4
Adjustment options for parallel sliding
armrests
5.4.1
Setting the height of the parallel sliding
armrests
The height of the parallel sliding armrest is set using the armrest angle.
1.
Release the knob to adjust the armrest angle (1).
2.
Set the angle for the armrest.
3.
Retighten the knob.
After adjusting the armrest height, the angle of the armpad needs to
be adjusted. Refer to 5.4.2 Adjusting the angle of the armpad on the
parallel sliding armrests, page 31.
5.4.2
Adjusting the angle of the armpad on the
parallel sliding armrests
Tools:
•
5 mm Allen key
1.
Release the bolts to adjust the armrest angle (1) with the Allen
key.
2.
Set the angle for the armrest.
3.
Re-tighten the bolts. Make sure that the Nordlock washers used
are re-inserted.
5.4.3
Adjusting the width of the parallel sliding
armrests
The parallel sliding armrests can be adapted to the backrest in eight
widths.
1529686-R
31
Summary of Contents for Storm4 True Track Plus
Page 109: ...Notes...
