background image

4

INVACARE

®

 SPIN

x

On this page a number of points affecting your personal safety are 
shown. Please Read it carefully!

Invacare

®

 is only responsible for product changes carried out by per-

sonnel who we authorise. We reserve the right to make any changes 
to equipment and specifications without prior notice.

Failure to comply with instructions given may result in personal injury 
and/or product damage. 

  
 

-  that all parts are attached securely to the frame

 

-  that all wheels and knobs are properly tightened

 

-  that all brakes and anti-tip devices function correctly

             

backrest stay or by the adjustable push handles.

    
    

because of the risk of tipping.

                  

over.

 "     

injury to your hands.

 #$ %
 &        %   

is reduced in wet and slippery conditions, as well as when on a 
slope.

 '    
 *  

chair.

 "     + :       

greater the risk of tipping the wheelchair becomes.

 ;     

long time exposure to sun reach temperatures over 41 °C.

This symbol means warning.

NB!

Always lift the wheelchair by gripping 
the frame at the points shown in the 
diagram. Never lift the wheelchair by 
the removable armrests or the foot-
rests. Ensure that the backrest and push 
handles are securely in place. Also read 
the chapter Safety instructions/Propel-
ling techniques.

LIFTING THE WHEELCHAIR

All manuals and user guides at all-guides.com

Summary of Contents for SpinX





































Reviews: