background image

29

INVACARE

®

 SPIN

x

Transport of wheelchair in vehicles  

with passive rear wheel fixation

The Invacare

®

 Spin

x

 with passive rear wheel fixation has been tested for safety in collisions according to ISO 

7176-19. The Invacare

®

 Spin

 with passive rearwheel fixation can be used for transport in vehicles that have 

been specially adapted for this purpose. The wheelchair must be securely fastened in the vehicle according to the 
methods described on the following page. Remember that the best solution is always to move the user from the 
wheelchair into a normal car seat.

TEST REPORT FROM DYNAMIC SAFETY RESTRAINT TEST

Test no:

=ƒX‰„}‰

?  & '

Date:

  

23/11/2006

Pulse specification:

   

ISO 7176-19 / ISO-10542

Wheelchair:

†  

?  & '

†

?  

®

 Spin

x

 with passive rearwheel fixation 

 

>  

Safety restraint device:

†  

#; ;

†

<<&~">~{~&‡<<&~ˆ*~">~{~&

 

#€=&

 

‰=&

User safety belt:

†  

#; ;

†

Š?&~}ˆ~">~<ˆ

 

Testdummy:

   Hybrid 

III 

<

„ƒ

Test configuration:   

 

;<‰zz~;*‰z

<

YXX

'

" ‹  

;

;  z

ˆ ‹

€

>$ŒXYXX}

&

Y‰

 

Q‰X$}„

'  

The safety restraint devices used in this test must be approved according to ISO10542.  We have chosen to work 
with Unwin, a well-known quality manufacturer of safety restraint devices for wheelchairs.

Only chairs equipped with transport kit 
and pelvic belt (see picture to the right) 
are approved for transport in vehicles.

All manuals and user guides at all-guides.com

Summary of Contents for SpinX





































Reviews: