16
INVACARE
®
SPIN
x
1.
A
2.
3-4.
D
E
B
C
Adjusting the height of the armrests
1. Flip up armrest
If your chair is equipped with armrests that can be
raised or lowered, this is achieved by loosening the
screw (A), moving the armrest into the required
position and retightening the screw.
When adjusting the height, do not place your
fingers between armrest pad and side plate as
they may get trapped.
ARMRESTS/MUDGUARD
2. Detachable armrest
If your chair is equipped with armrests that can
be raised or lowered, this is achieved by pulling
up the armrest and loosening the screw (B) under
the armrest. Move the screw up or down to the
desired position and retighten the screw. Lower
the armrest again.
When adjusting the height do not place your
fingers between seat tube and side plate as they
may get trapped.
"z
"z
3. Mudguard
Adjust the height of the mudguard by pulling up
the mudguard and loosening the screw (C). Move
the screw up or down to the desired position and
retighten the screw. Insert the mudguard again in
it's attachment.
When adjusting the height do not place your
fingers between seat tube and side plate as they
may get trapped.
4
. To adjust the depth of the mudguard, unscrew
screws (D) using an Allen key. Remove the nuts (E)
on the reverse side. Move the mudguard into the
required position and fasten the screws again.
"}
5 mm Allen key
All manuals and user guides at all-guides.com
all-guides.com
