1
Roze™ Patient Lift Liftarm Assembly
Hardware Replacement Kit
For more information regarding Invacare products, parts, and services, please visit www.invacare.com
Roze
™
Patient Lift
Liftarm Assembly Hardware Replacement Kit
NOTE:
Check
all
parts
for
shipping
damage.
In
case
of
shipping
damage,
DO
NOT
use.
Contact
carrier/dealer
for
further
instruction.
To
ensure
the
safe
installation,
operation
and
use
of
the
Roze
Patient
Lift,
these
instructions
MUST
be
followed:
WARNING
DO NOT install this equipment without first reading and understanding these instructions. If you are
unable to understand the Warnings, Cautions, and Instructions, contact Invacare Technical Support
before attempting to install this kit - otherwise, injury or damage may result.
After ANY adjustments, repair or service and before use, make sure that all attaching component
parts are secure.
Kit Description
This
hardware
kit
is
used
when
replacing
the
liftarm
assembly
(Invacare
P/N
1148554),
on
the
Roze
Patient
Lift.
Assembly, Installation and Operating Instructions
SAVE THESE INSTRUCTIONS
DESCRIPTION
PART NUMBER
QTY
USE
Screws, Socket Head, 1/2 x 2.00
1148530
2
Attaches Liftarm Assembly to Mast Assembly
Washers, Nylon
1148531
2
Plugs, Tube
1148532
2
Bushings, Mast Bronze
1154556
2
Bushings
1148527
2
Washers, Plain
1146913
2
Knobs, Sling
1070177
2
Replacement for Existing Sling Knobs
Screws, Socket Head, 3/8 x 2.25
1146879
2
Attaches Sling Knob to Liftarm Assembly
Caps, Knob
1070902
2
Washers, Step
1154620
2
Nuts
1148559
2
Caps, Nut
1154619
2
Ring, Hook
1155290
2
New Hook Rings
