1.
Shorten or extend the loop
D
as required.
2.
Thread loop
D
through catch
A
and plastic buckle
E
until the loop is flat.
If this adjustment is not sufficient, it might be required to
re-fit the posture belt at the fixations.
Fitting the posture belt at the fixations
CAUTION!
– Thread the belt loop through both plastic
buckles to avoid the belt from loosening.
– Do the adjustments on both sides equally,
so that the buckle clasp remains in a central
position.
– Make sure that the belts do not get caught in
the spokes of a rear wheel.
1.
Thread the loop
F
through the fixation on the chair
G
and then through BOTH plastic buckles
H
.
4.11.1 Posture belt mounting
A
C
C
B
1.
Fasten the posture belt
A
on the frame
B
.
2.
Attach the screw and the nut
C
and tighten.
4.12 Air pump
The air pump is fitted with a universal valve connection.
Using the correct valve connection depends of the inner
tube valve type.
1.
Remove the dust cap from the valve connection.
2.
Push the valve connection onto the open valve on the
wheel and pump the wheel up.
There are two types of pumps available:
•
Low pressure <6 bars
•
High pressure >6 bars
Instruction for use printed on the packaging.
4.13 Passive illumination
You can attach reflectors to the rear wheels.
4.14 Cane holder
WARNING!
Risk of overturning
– Ensure that the cane holder does not project
beyond the external diameter of the rear wheel.
1.
Place the cane in the holder
B
.
2.
Fix the top of the cane to the backrest
A
.
1431580-C
27
Summary of Contents for Rea Focus 150
Page 54: ...Notes...
Page 55: ...Notes...
