4.
C
Turn the adjustment screw
C
to the desired angle
position.
The castor can be angled in 5 different positions
from 0° to 6°.
5.
C
C
B
A
Push the adjustment screw
C
back into position after
the adjustment.
6.
Re-tighten the screws
A
and
B
.
The screws should be tightened with a torque of
20 +/- 2 Nm.
5 mm allen key
Castor height
Observe that only the height (89,4 mm) version of
the castor attachment is adjustable in height.
1.
A
B
Loosen the screw
A
with approximately 7 turns.
2.
Loosen screw
B
with approximately 2 turns.
3.
C
C
D
Pull out the castor housing
C
and adjust it to a desired
height.
There are three possible fixed heights
D
.
4.
A
B
C
Push the castor housing
C
back into position after
adjustment.
5.
Re-tighten the screws
A
and
B
.
The screws should be tightened with a torque of
20 +/- 2 Nm.
5 mm allen key
Adjusting the brakes
WARNING!
Reduced brake effect
– Incorrect adjustments of the brake can reduce
the effectiveness of the brake.
M
A
X
D
M
AX
D
WARNING!
Risk of reduced brake effect
– The brakes must not be moved further forwards
or backwards than indicated by the warning
label
D
.
M
A
X
A
B
C
1.
Check that the tires have the correct air pressure.
You can find the information about the air
pressure on the tire.
2.
Loosen the screw
A
.
3.
Slide the brake
C
forward or backwards to the desired
position.
4.
Re-tighten the screw.
The distance between the brake shaft
B
and the
tire should be approximately 15 mm.
If further adjustments of the brakes are necessary, the brake
attachment can also be adjusted forwards or backwards:
1431580-C
21
Summary of Contents for Rea Focus 150
Page 54: ...Notes...
Page 55: ...Notes...
