Rea® Focus™
5 Setup
5.1 Safety information
CAUTION!
Risk of injury
– Before using the wheelchair, check its
general condition and its main functions,
.
Your authorized provider will supply your wheelchair ready
for use. Your provider will explain the main functions
and ensure that the wheelchair meets your needs and
requirements.
Adjustments of the axle position and the castor supporters
must be carried out by a qualified technician.
If you receive your wheelchair folded, read section
5.2 Delivery check
Any transport damage must be reported immediately to
the transport company. Remember to keep the packaging
until the transport company has checked the goods and a
settlement has been reached.
5.3 Fitting the rear wheels
A
B
C
1.
Press and hold in the quick—release button
B
in the
center of the hub.
2.
Put the rear wheel and the rear wheel axle
C
in the
rear wheel attachment
A
.
3.
Pull the wheels outwards to check that the wheel is
securely locked in its position.
WARNING!
Risk of injury
– Check that the rear wheel is securely locked
in its position! It should not be possible to
remove the wheels when the quick-release
button is inactivated.
5.4 Fitting the seat
A
B
There are two ways to unfold the seat:
•
Push the handle in the middle of the seat plate
downwards
A
.
•
Lift the rear wheel slightly upwards and push the push
handles outwards
B
. When the seat plate is in the
correct position, a “click” sound will be heard.
WARNING!
Risk of trapping fingers
– Be careful not to trap your fingers or hand
when the seat plate is pushed in position.
5.5 Fitting the backrest bar
A
B
1.
Fold up the backrest bar
A
.
2.
Secure the backrest bar in the attachment with the
quick-release knob
B
.
Make sure that the quick-release knob
B
is securely
locked in its position.
5.6 Fitting the armrests
Flip—up armrests:
28
1431580-C
Summary of Contents for Rea Focus 150
Page 54: ...Notes...
Page 55: ...Notes...
