Invacare Pronto M71 Base Owner'S Operator And Maintenance Manual Download Page 41

Page: 41 / 80

SECTION 11—WHEELCHAIR OPERATION

Part No 1143240

Pronto® M71™Base with SureStep®

3. Remove the three hex mounting screws, bushings and locknuts that secure the

mounting bracket to the three mounting holes on the armrest plate.

NOTE: The mounting bracket is mounted to the inside of the armrest plate.

4. Reposition the mounting bracket on the opposite armrest plate.
5. Using the three hex mounting screws, bushings and locknuts secure the mounting

bracket to the three mounting holes of the armrest plate.

6. If necessary, perform the following to reposition the adjustment lock:

A. Slide the adjustment lock from the mounting bracket.
B. Rotate adjustment lock 180° and slide adjustment lock over the opposite end of the

mounting bracket.

7. Slide joystick mounting tube through the mounting bracket to the desired position

and secure adjustment lock to tube by turning lever on adjustment lock.

FIGURE 11.9

Repositioning Joystick - Van Seats

Adjustable ASBA Seats

NOTE: For this procedure, refer to

FIGURE 11.10.

1. Turn the adjustment lock lever to

release the joystick mounting tube from

the mounting bracket.

2. Remove the joystick from the wheelchair.
3. Remove the three hex screws that

secure both halves of the mounting

bracket to the arm tube.

4. Reposition mounting bracket on

opposite arm tube ensuring the

threaded plate of the mounting bracket

is on the inside of the arm tube as

shown in FIGURE 11.10.

FIGURE 11.10

Repositioning Joystick -

Adjustable ASBA Seats

5. Using the three hex mounting screws and washers, secure both halves of the mounting

bracket to the arm tube.

Locknuts

Bushings

Armrest

Plate

Mounting Bracket

Hex Mounting

Screws

Adjustment

Lock Lever

Joystick

Mounting

Tube

NOTE: Joystick not

shown.

NOTE: MK5 SPJ Joystick shown. All other joysticks are adjusted the same way.

Washers

Hex

Mounting

Screws

Mounting

Bracket

Adjustment

Lock Lever

Joystick

Mounting

Tube

Mounting Bracket

(Threaded Plate)

Arm

Tube

NOTE:

Joystick

not

shown.

Summary of Contents for Pronto M71 Base

















































































Search results

Summary of Contents for Pronto M71 Base

Reviews:

Related manuals for Pronto M71 Base

Brands by name

Popular brands

Invacare Pronto M71 Base, Owner'S Operator And Maintenance Manual

Search results

Summary of Contents for Pronto M71 Base

Reviews:

Related manuals for Pronto M71 Base

Brands by name

Popular brands