![background image](http://html.mh-extra.com/html/invacare/pronto-m71-base/pronto-m71-base_owners-operator-and-maintenance-manual_2082577042.webp)
SECTION 11—WHEELCHAIR OPERATION
Pronto® M71™Base with SureStep®
42
Part No 1143240
6. Slide the joystick mounting tube through the mounting bracket to the desired position.
7. Turn the adjustment lock lever to secure the joystick mounting tube into the mounting
bracket.
Disconnecting/Connecting the Joysticks
NOTE: For this procedure, refer to FIGURE 11.11.
NOTE: The joystick connector is located at the rear of the seat frame.
SPJ+ Joysticks
Disconnecting
1. Loosen the thumb screws on the joystick connector.
2. Disconnect the joystick connector from the controller connector.
Connecting
1. Align the joystick connector with the controller connector.
2. Secure the joystick connector to the controller connector using the thumb screws on
the controller connector.
WARNING
The excess joystick cable must be coiled, and tie-wrapped to the rear of the seat
frame to ensure that cable does NOT become entangled or damaged during normal
operation of seating system - otherwise injury or damage may result.
3. If necessary, coil and tie wrap excess joystick cable to rear of seat frame.
FIGURE 11.11
Disconnecting/Connecting the Joysticks - SPJ+ Joysticks
MPJ+ Joysticks
NOTE: For this procedure, refer to FIGURE 11.12.
Disconnecting
1. Pull the latch away from the joystick connector.
2. Disconnect the joystick connector from the remaining connectors.
Joystick
Connector
Light Grey Collar
Controller
Connector