SECTION 16—TRANSPORT
Part No 1143240
65
Pronto® M71™Base with SureStep®
SECTION 16—TRANSPORT
WARNING
Formula PTO Plus Systems ONLY - DO NOT attempt to disassemble wheelchair
or remove the seat - otherwise injury or damage may result.
After ANY adjustments, repair or service and BEFORE use, make sure that all
attaching hardware is tightened securely - otherwise injury or damage may result.
For the following procedures, make sure the ON/OFF switch on the joystick is in the
OFF position.
CAUTION
All cables are securely tie-wrapped in place before being shipped. If any changes are
made to the locations of the tie-wrapped cables, the customer must verify that they
are clear from being pinched in any of the latching points of the “take-apart” side-
frames.
Cables MUST be routed and secured properly to ensure that they DO NOT
become entangled or damaged during normal operation of seating system.
Transporting the Wheelchair
FIGURE 16.1
Transporting the Wheelchair
Seat
Batteries
Side Frame
Attachment Points
(Typical both sides)
Left Side
Assembly
*Front Shroud
Front Frame Support.
Release handle is
located underneath.
Footrest
Battery Tray
Right Side
Assembly
*Rear Shroud
Seat Frame
Attachment Points
(Typical both sides)
*NOTE: Front and rear shrouds are removable but removing the shrouds is not required for
transporting.