Part No. 1114817 - Rev.B
3
Personal Back10
DETERMINING PERSONAL BACK10 MOUNTING
POSITION (FIGURE 2)
NOTE: Total back height (Measurement B) must be determined by therapist after a physical assessment.
1.If necessary, remove existing back upholstery or back system.
2.Perform the following to find the mounting position of the Personal Back10 mounting
hardware as shown in FIGURE 2:
A.Measure the total Personal Back10 height
(Measurement A)
.
B.Subtract the total Personal Back10 height
(Measurement A)
from the total back
height required by Therapist
(Measurement B)
. This measurement is the distance
between the bottom of the Personal Back10 and seat cushion
(Measurement C)
.
C.Measure distance from bottom of Personal Back10 to bottom of stud
(Measurement D)
.
D.Add Measurement D and Measurement C together. This is the distance between the
seat cushion and the mounting hardware location
(Measurement E)
.
3. From the seat cushion, measure up along the back cane to the mounting hardware location
(Measurement E). Mark this measurement on the inside of both back canes.
FIGURE 2 - DETERMINING THE MOUNTING POSITION FOR
INSTALLATION OF PERSONAL BACK10
Mark
Personal Back10
Back Cane
Seat Cushion
Measurement A
Measurement E
Measurement B
Measurement D
Stud
Measurement C