SECTION 1—GENERAL GUIDELINES
P9000
™
XDT
10
Part No. 1118386
SECTION 1—GENERAL GUIDELINES
WARNING
This section contains important information for the safe operation and use of this
product.
DO NOT use this product or any available optional equipment without
first completely reading and understanding these instructions and any additional
instructional material such as Owner’s Manuals, Service Manuals or Instruction
Sheets supplied with this product or optional equipment. If you are unable to under-
stand the Warnings, Cautions or Instructions, contact a healthcare professional,
dealer or technical personnel before attempting to use this equipment - otherwise,
injury or damage may occur.
Controller Settings/Repair or Service
Set-up of the Electronic Control Unit is to be performed only by a qualified technician.
The final adjustments of the controller may affect other activities of the wheelchair.
Damage to the equipment could occur if improperly set-up or adjusted.
Wheelchairs should be examined during maintenance for signs of corrosion (water
exposure, incontinence, etc.). Electrical components damaged by corrosion should be
replaced IMMEDIATELY.
Wheelchairs that are used by incontinent users and/or are frequently exposed to water
may require replacement of electrical components more frequently.
Operating Information
Performance adjustments should only be made by professionals of the healthcare field or
persons fully conversant with this process and the driver's capabilities. Incorrect settings
could cause injury to the driver, bystanders, damage to the chair and to surrounding
property.
After the wheelchair has been set-up, check to make sure that the wheelchair performs to
the specifications entered during the set-up procedure. If the wheelchair does not
perform to specifications, turn the wheelchair off immediately and reenter set-up
specifications. Repeat this procedure until the wheelchair performs to specifications.
ALWAYS shift your weight in the direction you are turning. DO NOT shift your weight in
the opposite direction of the turn. Shifting your weight in the opposite direction of the
turn may cause the inside drive wheel to lose traction and the wheelchair to tip over.
DO NOT shift your weight or sitting position toward the direction you are reaching as the
wheelchair may tip over.
DO determine and establish your particular safety limits by practicing bending, reaching
and transferring activities in the presence of a qualified healthcare professional before
attempting active use of the wheelchair.
