SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING
Part No. 1118386
25
P9000
™
XDT
❑
Inspect tires for flat spots and wear. If tires are pneumatic, check for proper inflation.
❑
Ensure seat and/or back upholstery have no rips and do not sag. Replace if necessary.
Inspect/Adjust Weekly
❑
Ensure seat is secured to wheelchair frame.
❑
Ensure seat release latch is not worn and is functional. Replace if necessary.
❑
Inspect tires for flat spots and wear. If the tires are pneumatic, check for proper
inflation.
❑
Ensure all caster/wheel/fork/headtube fasteners are secure.
❑
Ensure that casters are free of debris.
❑
Ensure arm pivot points are not worn and/or loose. Replace if necessary.
Inspect/Adjust Monthly
❑
Ensure wheel mounting nuts are secure on drive wheels.
❑
Ensure no excessive side movement or binding occurs when drive wheels are lifted
and spun when disengaged (free-wheeling).
❑
Ensure that drive wheel axle bolts and locking tab washers are secure.
❑
Inspect caster assembly has proper tension when caster is spun. Caster should come
to a gradual stop.
❑
Ensure that casters are free of debris.
❑
Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.
❑
Ensure that the wheel locks engage properly and do not interfere with the tires when
rolling. Also, ensure that the pivot points are free of wear and looseness.
❑
Inspect the seat positioning strap for any signs of wear. Ensure buckle latches. Verify
hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
Inspect/Adjust Periodically
❑
Ensure wheelchair rolls straight (no excessive drag or pull to one side).
❑
Ensure that all fasteners on the clothing guards are secure.
❑
Ensure arms are secure but easy to release and adjustment levers engage properly.
❑
Ensure adjustable height arms operate and lock securely.
❑
Ensure arm pivot points are not worn and/or loose. Replace if necessary.
❑
Ensure armrest pads sit flush against arm tubes.
❑
Ensure seat and/or back upholstery have no rips and do not sag. Replace if necessary.
❑
Ensure seat release latch is not worn. Replace if necessary.
❑
Ensure seat and/or back upholstery have no rips and do not sag. Replace if necessary.
