Invacare Crossfire All Terrain User Manual Download

Page: 18 / 88

Top End

Crossfire™

3.2 Typical Product Parameters

All specifications are approximate.

Crossfire T6

FRAME:

6061T6 Aluminum

FRONT FRAME:

Tapered front end (Standard), V-Style (Optional)

FRONT FRAME ANGLE:

70°, 75°, 80°, 85° or 90°

FOOTREST:

Tubular footrest in same material as frame (Standard),

Adjustable Angle NCO, Plastic or Carbon Fiber Cover (Optional)

SEAT HEIGHT

FRONT:

16 to 21 inches (40.6 to 53.3 cm) (Fixed)

REAR:

14 to 20 Inches (35.6 to 50.8 cm) (Fixed), Ergo Level Seat (Optional)

ARMS (OPTIONAL):

Swing-away Style

SIDE GUARDS (OPTIONAL)

FOLDING BACK:

Removable, Folding, Removable with Fender

FIXED BACK:

Fixed Aluminum, Fixed Carbon Fiber

SEAT WIDTH:

12 to 18 inches (30.5 to 45.7 cm) (Standard), 19 to 20 inches (48.3 to
50.8 cm) (Optional), Tapered Seat Width (Optional)

1134872-D~08

Summary of Contents for Crossfire All Terrain

























































































Search results

Summary of Contents for Crossfire All Terrain

Reviews:

Related manuals for Crossfire All Terrain

Brands by name

Popular brands

Invacare Crossfire All Terrain, User Manual

Search results

Summary of Contents for Crossfire All Terrain

Reviews:

Related manuals for Crossfire All Terrain

Brands by name

Popular brands