Top End
®
Crossfire™
4.12 Repositioning the Camber Tube Clamp
Socket Screws
1.
Remove the rear wheels. Refer to 5.7 Removing/Installing Rear
Wheels, page 65.
2.
Refer to Socket Screw Mounting Positions in 4.10 Adjusting
Wheelbase Length, Adjusting Center of Gravity (COG), page 45
to determine which socket screw(s)
A
MUST be moved and
to which mounting positions.
3.
Remove the four socket screws
A
and washers
B
from both
camber tube clamps
C
.
4.
Align the desired mounting positions of the camber tube clamps
C
with the opening of the camber tube supports
D
.
CAUTION!
–
Ensure one empty mounting position remains
between the two socket screws
A
, otherwise
damage to the wheelchair may occur.
5.
Install the four socket screws
A
and washers
B
into the desired
mounting positions of both camber tube clamps
C
. Hand tighten.
Ensure that both camber tube clamps
C
are adjust to
the same position in the camber tube support
D
. This
will ensure that the camber tube
E
remains at 90° to
each side frame.
6.
Slide the camber tube
E
forward or backward to adjust the
wheelbase length to the desired position. Securely tighten the
four socket screws
A
.
7.
Install the rear wheels. Refer to 5.7 Removing/Installing Rear
Wheels, page 65.
48
1134872-D~08
Summary of Contents for Crossfire All Terrain
Page 17: ...Overview 3 Overview 3 1 Label Locations 1134872 D 08 17 ...
Page 87: ...Notes ...
