Top End
®
Crossfire™
4.18 Converting Wheel Lock From Push-to-Lock
or Pull-to-Lock
Converting From Push-to-Lock to Pull-to-Lock
DETAIL “A”
WHEEL LOCK
IN PUSH-TO-
LOCK CONFIG-
URATION
1.
Remove set screw
A
from the lower stop position (Detail “A”).
As the wheel lock handle
B
is pushed downwards, the
wheel lock will engage and then disengage the wheel.
2.
Push wheel lock handle
B
down to access the upper stop
position (Detail “B”).
3.
Install set screw
A
into upper stop position.
4.
Pull wheel lock handle
B
up to engage wheel lock. If wheel
lock does not properly engage the wheel, refer to 5.15
Replacing/Adjusting the Wheel Locks, page 75.
Converting From Pull-to-Lock to Push-to-Lock
DETAIL “B”
WHEEL
LOCK IN
PULL-TO-
LOCK CON-
FIGURA-
TION
1.
Remove set screw
A
from the upper stop position (Detail “B”).
As the wheel lock handle
B
is pulled upwards, the wheel
lock will engage and then disengage the wheel.
2.
Pull wheel lock handle
B
up to access the lower stop position
(Detail “A”).
3.
Install set screw
A
into lower stop position.
4.
Push wheel lock handle
B
down to engage wheel lock. If
wheel lock does not properly engage the wheel, refer to 5.15
Replacing/Adjusting the Wheel Locks, page 75.
54
1134872-D~08
Summary of Contents for Crossfire All Terrain
Page 17: ...Overview 3 Overview 3 1 Label Locations 1134872 D 08 17 ...
Page 87: ...Notes ...
