Comet
3.
Disconnect battery cable
A
.
4.
Remove steering column and chassis. See
4.8.4
Replacing steering column, page 23
.
Replacing steering link/coupling rod
1.
Remove circlip (1) on steering link (2).
2.
Replace steering link.
3.
Adjust length of steering link using setting screws (3).
4.
Remove circlip (4) on coupling rod (5).
5.
Replace coupling rod.
6.
Install parts of steering link and/or coupling rod in
reverse order.
7.
Test all functions (trial run).
Adjusting camber
1.
Loosen screws
A
.
2.
Spin steering link up by 0,5 cm. Wheels stand turned
inwards by 1°
C
from neutral position
B
.
3.
Install parts of steering link and/or coupling rod in
reverse order.
4.
Test all functions (trial run).
4.9.4 Replacing curve control device
CAUTION!
Risk of accident
Accidental rolling can lead to accidents.
– Secure mobility device against rolling away.
When disassembling, note the position of small parts
such as screws and washers. Put small parts down so
that they can be reassembled in the right sequence.
•
Phillips screwdriver
•
32 mm wrench
1.
Remove seat.
2.
Remove shroud.
3.
Disconnect battery cable
A
.
4.
Remove front shroud colored cap
A
.
5.
You can see curve control device
C
through opening
D
.
28
1603798-B
