Comet
5.
Loosen wheel suspension screw (1).
6.
Loosen screw (2).
7.
Replace wheel suspension.
8.
Install parts in reverse order.
Tighten screw (1) to 25 Nm.
9.
Apply brake, tighten wheel bolts at same time.
10. Adjust tracking. See
4.9.3 Replacing steering
link/coupling rod, page 27
.
11. Test all functions (trial run).
4.8.2 Replacing shock absorber
CAUTION!
Risk of accident
When parking mobility device on antitippers,
mobility device is no longer slowed by motor
brake. Mobility device can roll away out of
control.
– Place mobility device rear frame on a supporting
wooden block before you remove wheels.
CAUTION!
Risk of accident.
Accidental rolling can lead to accidents.
– Secure mobility device against rolling away.
When disassembling, note the position of small parts
such as screws and washers. Put small parts down so
that they can be reassembled in the right sequence.
The drive motor needs to be removed before you
can replace the left-hand shock absorber. If the
right-hand shock absorber is to be replaced, you do
not need to remove the drive motor.
•
10 mm wrench
•
17 mm wrench
•
Phillips screwdriver
•
5 mm Allen keys (2x)
•
Supporting wooden block
1.
Remove wheel (see user manual)
2.
Remove mud guard. See
4.10.1 Replacing drive unit,
page 29
.
Replacing rear shock absorber
1.
Remove top screw (1) on shock absorber (2).
2.
Remove both screws (4) from motor bracket (5).
3.
Remove shock absorber (2) with motor bracket (5).
4.
Remove bottom screw (6) on shock absorber (2).
5.
Replace shock absorber (2).
6.
Install shock absorber in reverse order.
7.
Use setting screw (3) to set spring hardness.
8.
Test all functions (trial run).
Replacing front shock absorber
1.
Remove top screw (1) on shock absorber (2).
2.
Remove bottom screw (4) on shock absorber (2).
3.
Replace shock absorber (2).
4.
Install parts in reverse order.
5.
Use setting screw (3) to set spring hardness.
6.
Test all functions (trial run).
4.8.3 Replacing swing arm
•
14 mm wrench
•
5 mm Allen key
1.
Remove rear shroud.
2.
Remove motor and differential gear. See chapter 4.10.1
Replacing drive unit, page 28.
3.
Remove batteries. See user manual.
22
1603798-B
