Comet
3.
Loosen securing bolt of seat support tube.
4.
Remove bolt (7), nut and washers.
5.
Remove seat support tube (2) from receptacle tube (1).
6.
Remove bellows (3) including spring (5) and plastic end
pieces (4 and 6).
7.
Fit plastic end pieces (4 and 6) to new spring.
8.
Grease spring generously. The spring should be covered
completely.
9.
Assemble bellows (3).
10. Install bellows (3) including the spring (5) and the plastic
end pieces (4 and 6).
11. Insert seat support tube (2) into receptacle tube (1) and
press down gently.
12. Reposition bolt (7), nut and washers.
13.
Firmly tighten securing bolt of seat support tube.
14. Reposition seat.
4.11.2 Replacing seat support tube
•
17 mm wrench (2x)
1.
Remove seat.
2.
Remove shroud. See “Removing shroud”.
3.
Remove securing bolt, nut and washers of seat support
tube.
4.
Replace seat support tube.
5.
Adjust seat height.
6.
Reinsert securing bolt, nut and washers and tighten.
4.12 Accessories
4.12.1 Accessories list
•
Mirror (right or left)
•
Safety vest
•
Warning triangle
•
Solid tires (without rim), 13 inch grey or black
•
Seat lifter kit, electrical, 12 cm
•
Seat suspensions
•
Front bumper
•
Rear bumper
•
Personal key
•
Crutch & Cane holder
•
Lockable storage box, front
•
Lockable storage box, rear, incl. clutch holder bracket
•
Rear basket
•
Backrest bag
•
Hour counter
•
Rollator holder incl. crutch holder
•
Windscreen
•
Seat belt
•
Oxygen bottle holder
•
Can holder
•
Off-board charger kit
•
Covers: Storage cover (Full scooter cover), Seat Cover
(Rain & Dirt protection)
The installation instructions for additional accessories
are available at your Invacare® provider or directly
from Invacare®.
32
1603798-B
