SECTION 12—TRANSPORTING THE WHEELCHAIR
57
SECTION 12—TRANSPORTING THE
WHEELCHAIR
WARNING
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service verify that on/off switch
on the joystick is in the off position.
The weight of the wheelchair without the user and batteries is approximately 74 lbs.
Use proper lifting techniques (lift with your legs) to avoid injury. Extreme caution is
advised when it is necessary to move an unoccupied power wheelchair. Invacare
recommends using two (2) assistants and making thorough preparations. Make sure
to use only secure, non-detachable parts for hand-hold supports.
CAUTION
Extra care in regards to the joystick should be used when transporting and/or stor-
ing the wheelchair, otherwise damage may occur.
NOTE: For this procedure, refer to FIGURE 12.1.
1. Remove the occupant from the wheelchair.
2. Remove the battery pack. Refer to Removing/Installing the Battery Pack on page 39.
3. Remove and fold the seat. Refer to Removing/Installing the Seat on page 26.
4. Remove any accessories on the wheelchair.
5. Bend your knees and keep your back straight.
6. Using non-removable (nondetachable) parts, transfer the seat, battery pack,
wheelchair base and any accessories to the desired location.
7. Reinstall any accessories that were removed in STEP 4.
8. Reinstall the seat. Refer to Removing/Installing the Seat on page 26.
9. Reinstall the battery pack. Refer to Removing/Installing the Battery Pack on page 39.
FIGURE 12.1
Fully
Assembled
Chair
DETAIL “A” - READY FOR TRANSPORTATION
Battery
Pack
Seat
Assembly
Base