SECTION 9—MOTORS
49
Removing/Installing the Motors
NOTE: For this procedure, refer to FIGURE 9.6.
NOTE: Ensure that the motor engagement handles are disengaged.
Removing
1. Disconnect the joystick. Refer to Disconnecting/Connecting the Joystick on page 35.
2. Remove the seat. Refer to Removing/Installing the Seat on page 26.
3. Remove the battery pack. Refer to Removing/Installing the Battery Pack on page 39.
4. Remove the drive wheel. Refer to Removing/Installing the Drive Wheels on page 54.
5. Remove the motor shroud. Refer to Removing/Installing Motor Shroud on page 46.
6. Unplug the motor from the controller.
7. Remove the two (2) mounting bolts, coved bracket, two (2) washers, and two (2)
locknuts that secure the motor to the base frame (Detail “B” of FIGURE 9.6).
8. Repeat STEPS 1 - 7 for the other motor.
FIGURE 9.6
Removing/Installing the Motors
Installing
1. Secure the motor to base frame with the two (2) mounting bolts, coved bracket, two (2)
washers, and two (2) locknuts (Detail “B” of FIGURE 9.6).
2. Plug the motor into the controller.
3. Install the motor shroud. Refer to Removing/Installing Motor Shroud on page 46.
Unplug/Plug
LEFT Motor
HERE
Unplug/Plug
RIGHT Motor
HERE
DETAIL “A”
Mounting
Bolts
Motor
Coved Bracket
Washers
Locknuts
DETAIL “B”
