SECTION 9—MOTORS
47
5. Remove the two (2) mounting screws,
washers, and locknuts that secure the
front of the base plate to the base frame.
6. Remove the two (2) mounting bolts,
washers, and locknuts to remove the
left battery pack bracket.
7. Repeat STEP 6 for the right battery
pack bracket.
8. Remove the base plate.
FIGURE 9.3
Installing
1. Install the left battery pack bracket using two (2) mounting bolts, washers, and
locknuts.
2. Repeat STEP 1 for the right battery pack bracket.
3. Secure the base plate on the base frame using the two (2) mounting screws, washers,
and locknuts. Securely tighten.
4. Install the battery pack. Refer to Removing/Installing the Battery Pack on page 39.
5. Install the seat. Refer to Removing/Installing the Seat on page 26.
6. Connect the joystick. Refer to Disconnecting/Connecting the Joystick on page 35.
Removing/Installing MK5 Controller
NOTE: For this procedure, refer to FIGURE 9.4 and FIGURE 9.5.
Removing
1. Disconnect the joystick. Refer to Disconnecting/Connecting the Joystick on page 35.
2. Remove the battery pack. Refer to Removing/Installing the Battery Pack on page 39.
3. Remove the seat. Refer to Removing/Installing the Seat on page 26.
4. Remove the motor shroud. Refer to Removing/Installing Motor Shroud on page 46.
Mounting Screws
Mounting
Bolts
Right Battery Pack Bracket
Left
Battery
Pack
Bracket
Washers
Locknuts
Base
Frame
Base Plate