30
7.2
Adjusting Tension Adjustable Back Upholstery (where
fitted)
The tension adjustable straps allow the backrest to follow the
contours of the back. This optimises support, allowing the backrest
to accommodate a range of body shapes. The straps can also be
used to provide support or relief to specific areas of the back.
Before adjusting the backrest, ensure that the joystick unit is
switched off.
1.
Remove the backrest cushion by releasing the velcro hook and
loop fastening strips.
2.
Adjust all the tension adjustable straps to the likely required
configuration by releasing the hook and loop fastening strips as
required.
3.
Ensure each strap is secured before the wheelchair is occupied.
4.
Assess the user's posture, support and comfort in the chair and
further tighten or loosen each strap, one at a time, as required.
5.
Ensure each strap is secured.
6.
Replace the backrest cushion.
(Image to display tension adjustable
back straps – adjustment to be carried
out from the rear of the chair)
CAUTION:
Ensure that each belt is secured before sitting in the chair.
When adjusting the backrest with the user seated, only adjust one strap at a time ensuring that the strap is
secure before moving onto the next strap.
The Apollo Indoor fitted with a tension adjustable back can be used as a seat in transport. (See section 10 for
further information).
