Intrinsyc Open-
Q™ 605 SBC User Guide and HW Specification
V. 1.4
22
Copyright Intrinsyc Technologies Corporation
Header J3502 (TE Connectivity: 2132415-4) can be mated with a few different plugs, such as TE
1969442-4, TE 1744417-4, and TE 2110992-4. Refer to the Section 3.5.1.1 for battery pack
selection. Please note that the suggested plugs do not come with wire crimps. TE Connectivity
suggests to use 2110989-1 with these plugs.
Table 3-8 – Battery connector J3502 pin out
Pin
Signal
Description
Note
1
VBATT_CONN
Battery Positive Terminal
2
BATT_ID_CONN
Internal Battery ID
3
BAT_THERM_CONN
Internal Battery Thermistor
Ensure that the
thermistor value of
battery is 10K ohm
4
GND
3.9
Open-Q™ 605 Display Connector (J2700)
Figure 9: 30-Pin display connector (J2700)
A FPC connector, J2700, is located on the bottom side of the SBC designed to connect to an
external MIPI DSI display. This connector is a MOLEX 5051103091 and accepts a 0.5 mm pitch
FPC cable. Please refer to Section 6.2: LCD Display for more information.
Table 3-9 – Display connector J2700 pin out
Pin
Signal
Description
1
GND
Ground
2
DSI0_L2_N
DSI Data Pair 2: Negative Channel
3
DSI0_L2_P
DSI Data Pair 2: Positive Channel
4
GND
Ground
5
DSI0_L3_N
DSI Data Pair 3: Negative Channel
6
DSI0_L3_P
DSI Data Pair 3: Positive Channel
7
GND
Ground
8
DSI0_L0_N
DSI Data Pair 0: Negative Channel
9
DSI0_L0_P
DSI Data Pair 0: Positive Channel
10
GND
Ground
