Intrinsyc Open-
Q™ 605 SBC User Guide and HW Specification
V. 1.4
19
Copyright Intrinsyc Technologies Corporation
Figure 6: J3501 pin configuration for DC power
Connect the supplied 12 VDC adaptor to DC Jack (J3500). Alternatively, DC power (5-15V) may
be connected to the Expansion Connector. See section 3.11 for the Expansion Connector pinout
table.
3.6
SBC Connectors
The following table provides an overview of the connectors, expansions, and their usages on the
SBC.
Table 3-7
–
SBC expansion options and usage
Domain
Description
Specification
Usage
Power
AC/barrel connector
12 V DC Power Supply
5A current
DC power input
Battery Connector
4 pin header
For battery operation and
charging
Buttons
Power button
SMD button
Button for power on/off
and suspend/resume
key
SMD Button
Key
Volume – key
SMD Button
Volume – Key
LCD Display and
Touch connector
30 pin for LCD signals via
FPC connector to display
adapter board
4-lane MIPI DSI0
I2C/SPI/GPIO
Backlight
MIPI Alliance Specification
v1.01
MIPI D-PHY Specification
v0.65,v0.81, v0.90, v1.01
To drive MIPI DSI LCD
panel with touch controller
CSI Camera
connectors
2 x CSI port connector with
CLK, GPIOS, CCI
Supports 2 x Camera
interfaces via two separate
connectors
•
2 x MIPI-CSI each 4
lane
•
Separate I2C / CCI
control
To connect third party
camera module
