6. Equipment Commissioning
82
Checking Operation
,
Continued
Terminal
station
procedure
This paragraph describes how to check the WiBAS
TM
-OSDR TS or
WiBAS
TM
-Connect operation (taking in consideration that all commissioning
works have been completed successfully):
Step
Action
1
Communicate with terminal station through inband.
2
Go to
Equipment Management
> Radio
and check the status as
shown below:
Go to
Equipment Management
> Modem
and check the status.
3
Go to
Summary
>
Terminals
and check the values of the
following:
•
Connectivity:
connected
•
Physical Mode (UL & DL): “based on the radio planning data”
•
RSSI: “based on the radio planning data”
•
SNR: “based on the system expected data”
4
Go to
Alarm List
and check if active alarms exist (without
preventing system operation).
5
Go to Service Provisioning and check if the values of the following
are the expected ones:
•
Bridge
•
Ethernet CoS Flow
•
Synchronization
End of procedure.
(1)
Synchronization is related to WiBAS-OSDR TS only.
