4. Installation Procedures
62
Sectoral and Parabolic Antenna
,
Continued
Procedure
, continued
Step
Action
16
Remove the OSDR and the XPOL tool.
17
Install the OSDR onto the antenna as described to steps 5, 6 and 7.
18
Use the U-wrench tool to perform
azimuth adjustment
(1)
, as shown below.
•
Do not over tighten.
•
For maximum tightening torque please follow the antenna installation leaflet
(available in package).
End of procedure for sectoral 26/28/32 GHz.
Continued on next page
(1)
The values must be taken from RF planning team.
