Outdoor Software Defined Radio (OSDR) platform
Installation & Cabling Manual - Edition 3.0
61
Sectoral and Parabolic Antenna
,
Continued
Procedure
, continued
Step
Action
14
Install the OSDR onto the antenna as described to steps 5, 6 and 7.
15
To correct the
elevation angle
for matching with the RF planning data, perform the
following actions:
A: Place the inclinometer, as shown below.
B: Use the U-wrench tool to perform
elevation adjustment
, as shown below.
Perform adjustment till the inclinometer
reaches the tilt provided by RF
planning.
C: All elevation nuts and bolts should be tightened.
•
Do not over tighten.
•
For maximum tightening torque please follow the antenna installation
leaflet (available in package).
Continued on next page
