4. Installation Procedures
66
Panel Antenna
,
Continued
Mounting kit
installation
procedure
To install the mounting kit, proceed as follows:
Step
Action
1
Perform the following actions:
A: Unscrew the azimuth adjuster screw.
B: Release the u-bolts.
2
Place the arm bracket to the pole and install the two U-bolts, as
shown below.
Use the U-wrench to tighten (washer, lock washer and nut).
Do not over tighten.
Adjust the tool for max tightening
torque
15 Nm
.
Continued on next page
