manualshive.com logo in svg

INTORQ BFK471-25, Translation Of The Original Operating Instructions

The INTORQ BFK471-25 manual, available for free download at manualshive.com, provides a Translation Of The Original Operating Instructions for easy reference. This comprehensive guide offers detailed instructions on operating and maintaining the product, for smooth and efficient performance. Enhance your user experience with this essential manual.

Share
Download
background image

Mechanical installation

INTORQ | BA 14.0200 | 02/2016

24

Assembly of the stator

1. Push the complete stator (1) onto the shaft.

Fig. 8

Assembly of the stator

Fig. 9

Mounting the stator to the end shield

2. Screw the complete stator (1) onto the end shield (15) using the screw set supplied (10). Tightening 

torque 

 15 - use a torque wrench!

1

Stator, complete

6

Flange

12 Complete manual release

3

Complete rotor

10 Socket head cap screw with seal

15 End shield

NOTICE

In order to ensure that there are no leaks, be sure to use the screw set with seals (included in 
the delivery)! New seals must always be used!

Summary of Contents for BFK471-25


















































Reviews:

No comments

Related manuals for BFK471-25

Brands by name

Popular brands

Load more brands