Mechanical installation
INTORQ | BA 14.0200 | 02/2016
22
4.2
Assembly
4.2.1
Preparation
1. Unpack the spring-applied brake.
2. Check for completeness.
3. Check the nameplate data (especially the rated voltage).
4.2.2
Brake assembly
Installation of the hub onto the shaft
Fig. 5
Installing the hub onto the shaft
1. Insert keyway (4.1) into the shaft.
2. Press the hub (4) onto the shaft.
3. Secure the hub against axial displacement (for example, by using a circlip (4.2)).
NOTICE
The toothed hub and screws must not be lubricated with grease or oil.
Single-rotor design
Double-rotor brake
4
Hub
4.1 Key
4.2 Circlip
15 End shield
NOTICE
For reverse operations, we recommend also glueing the hub to the shaft.
4.1
15
4
4.2
2
4.1
15
4
4.2
2
