Technical specifications
INTORQ | BA 14.0200 | 02/2016
12
3
Technical specifications
3.1
Product description
3.1.1
Important notes
Single-rotor design
Fig. 1
Design of the BFK471-25 spring-applied brake, single-rotor design
NOTICE
This brake should only be operated with the bridge-half-wave rectifier (included in delivery).
The power during the release is 440 W for 1.3 sec., then it is reduced to 110 W.
NOTICE
Due to the structural design of the stator, the air gap cannot be installed downstream.
❚
When the wear limit is reached:
- in the case of the single-rotor design, the rotor must be replaced
- in the case of the double-rotor design, the "Flange complete" unit and the rotor must be
replaced.
A
A
Check hole, air gap with plug screw
1
Stator, complete
4
Hub
12 Manual release
2
Armature plate
6
Flange
33 Hollow shaft end cover
3
Complete rotor
10 Six socket head cap screws, DIN EN ISO 4762
34 Plug screw
10A Four socket head cap screws, DIN EN ISO 4762
(short)
AA
