Operation Manual 5280 EPSHP
63
DANGER!
Danger of burns due to hot oil!
Danger of hydraulic oil splash!
According to the recommendations of the hydraulic power supply manufacturer, the oil in it
should be replaced after a year of intensive work.
To change the oil, unscrew the drain plug 2 (fig. 48) located in the bottom of tank 1 (fig. 48).
Old oil should be drained while it is still warm.
Fresh oil should be poured after first screwing in the drain plug 2 through the filler opening 3.
(Fig. 49)
Figure 49 Location of the oil fill opening
