Operation Manual 5280 EPSHP
33
7.3.3 Emergency stop of the cutter
1. Press the button 5 (Fig.15)
The switch is used for emergency stopping of the machine.
After pressing it, the message "Disable safety button" will appear on the programmer. The
pressure beam and knife will stop.
7.3.4 Starting the cutter after emergency stop
1. Unlock button 5 (turn it around) (Fig.15)
2. Press the green button 2
When the stop has been made during the cutting cycle, pressing the cutting buttons again
will result in returning to the upper position of the clamping bar and the knife.
7.4 Determining the position of the approaching beam
DANGER!
Do not put your hands into the cutting area when backguage moves!
Determining the position of the approaching beam is carried out using the programmer 1 and
handwheel 2, figure 17.
INFO
The method of determining the position of the beam as well as the operation
of the programmer are described in the "Instruction for program unit".
