Operation Manual 5280 EPSHP
11
At the moment, the cutter can only support one operator!
The operator himself must also make sure that the machine is not operated by unauthorized
persons!
Table 2: List of threats occurring while operating the cutter
Lp. Factor/notification
Type of threat
I
Mechanical hazards
1
Motor, belt transmission of the mechanism of backguage
Catching, crushing
2
The lever system of the knife drive mechanism
Catching, crushing
3
The lever system of the knife drive mechanism
Crushing
4
The approaching movement of the backguage
Crushing
5
Cutting zone
Cut off, cut
6
Manipulation with a knife during change
Cut off, cut
7
The edges and corners of the cutter elements
Cut
8
Surfaces
Abrasion
II
Hydraulics hazards
1
Hydraulic system
Danger of chemical burns,
burns represent hot oil with a
temperature of approx.
80 °C
III
Electrical hazards
1
Direct touching
Electric shock
