Intimidator eNVy neighborhood vehicle, Owner'S Manual

Page: 35 / 128

Controller
Notice:
•
The controller is water resistant, not waterproof.
•
Avoid spraying the controller with high-pressure water.
•
Do not submerge the controller.
•
Do not attempt open, repair, or otherwise modify the controller.
•
Contact your authorized eNVy dealer if error codes display.
The controller, or computer, is the brain of the vehicle. The
vehicle’s rate of acceleration and deceleration can be adjusted by
the owner. If a fault occurs, the controller will display error codes on
the digital display.
Controller LED Status
The two LEDs located on the controller have four different display
modes, indicating the type of information they are providing.
Controller LED Status Chart
Display Status Action
Neither LED illuminated Controller is not powered
on; or vehicle has dead
battery; or severe damage. If machine will not turn
on, or turns on with this
indicator, contact an
authorized dealer.
Yellow LED flashing Controller is operating
normally. None
Yellow and red LEDs both
on solid Controller is in Flash
program mode. None (occurs during
software updates)
Red LED on solid Watchdog failure or no
software loaded. Contact dealer
Red LED and yellow LED
flashing alternately Controller has detected a
fault.
See “Controller
Troubleshooting”;
contact dealer.
35