Intimidator eNVy neighborhood vehicle, Owner'S Manual, Page: 40 / 128

Battery Charging
Warning:
•
Keep the charging area well ventilated and keep all flames and
sparks away during charging.
•
Utilize a heavy-duty extension cord connected to an outlet of
sufficient capacity to charge the machine
•
Do not use a ground fault interrupt (GFI) type cord on a GFCI-
protected outlet. The circuit should be rated for a minimum of
20 amps.
•
The eNVy is equipped with an interlock system that will not
allow it to move while the charging cable is plugged in. A small
blue plug icon will blink on the display when charging is in
process.
In order to charge the eNVy:
1. Ensure that the vehicle is safely parked on a level surface with
the switch off.
2. Connect the power cord to an appropriate live AC outlet which
is indicated by the blue “AC PRESENT” LED turning on. The
charger will start automatically as indicated by the yellow
“CHARGE STATUS” LED beginning to blink slowly.
3. If the charger must be disconnected from the battery while a
charge cycle is in progress, disconnect the AC power cord
from the AC outlet.
4. The charge cycle 80% point is indicated by the yellow LED
beginning to blink quickly.
5. The finish charge cycle phase is indicated by the solid
illumination of the yellow LED. There may be a light Sulphur
smell and a soft boiling noise coming from the batteries during
this phase. This is normal.
40