inti TECA LITIO IIP-241000BFL, Manual

Page: 26 / 28

26
www.intipv.com MANUAL DE USUARIO INVERSOR TECA LITIO / USER MANUAL INVERSOR TECA LITIO
TECHNICAL PARAMETERS
Model IIP-24 5 00BFL IIP-24 1 000BFL IIP-24 2 000BFL IIP- 243 000BFL IIP-48 4 000BFL
Rated output power 5 00W 1 000W 2 000W 3 000W 4 000W
Transfer time Bypass – Inverter = 8ms; Inverter – Bypass = 15ms
Rated DC voltage 24V 24V 24V 24 V 48V
DC voltage range 21V-32V 21V-32V 21V-32V 21 V- 32 V 42V-64V
Inverter mode
Rated output RMS
voltage
Output frequency
120/230Vac (100 - 120Vac; 200 - 240Vac)
50Hz ± 0, 1 Hz o 60Hz ± 0, 1 Hz
Output wave form
Sine wave
Output overcharge
1 10 % < load < 12 5 % + 10%; fault: output turns off after 1 5 minutes of continous loads.
12 5 % < load < 150% + 10%; fault: output turns off after 10 seconds of continous loads.
150% < load < 200% + 10%; fault: output turns off after 2 seconds of continous loads.
Load > 200% + 10%; fault:output turns off after 1,5 seconds of continous loads.
Short-circuit Breaker
Rated efficiency ≥93%
Peak efficiency >95%
Power factor 0,9 - 1
Line mode
Input voltage range
Input voltage
frequency
Rated output voltage ± 15% (narrow range), rated output range ± 23% (wide range)
40Hz - 70Hz
Input wave form Pure sine wave; grid or generator
Short-circuit
protection
Breaker
Output overload 120% > load < 150% ± 10%; fault: output turns off after 10 seconds
150% > load ± 10%; fault: output turns off after 1 second
Overload protection
turn off
16,0 for 12V, *2 @ 24V, *4 @ 48V
Transfer in line mode
efficiency
>95%
Charge current
2 0A
3 0 A 35 A 50 A 35 A
AC charge
The charge current can be setup (5A UP/DOWN)
Setup of charging battery voltage type
Battery type Fast charging voltage
Gel U.S.A 14,0V
Floating voltage
13,7V
A.G.M 1 14,1V 13,4V
A.G.M 2 14,6V 13,7V
Sealed lead acid 14,4V 13,6V
Gel Euro 14,4V 13,8V
Open lead acid 14,8V 13,3V
Calcium 15,1V 13,6V
IIP-485000BFL
5000W
48V
42V-64V
45A