22
www.intipv.com
MANUAL DE USUARIO INVERSOR TECA LITIO / USER MANUAL INVERSOR TECA LITIO
11
Maximum grid charging current
The default value is the maximum one, with 5A as a base and 0A as the minimum one, it
can be set up or down. The maximum value cannot exceed Pout * 0,42 / Vdc.
12
Maximum grid charging current
The default value is the maximum one, with 5A as a base and 0A as the minimum one, it
can be set up or down. The maximum value cannot exceed Pout * 0,42 / Vdc.
13
Low battery voltage transferred to
the grid
The default value is the low voltage alarm point of the battery abled to be set between
10,5V y 12.5V (*2@24V, *4@48V). The increase of each click is 0,1V for 12V, *2@24V and
*4@48V.
18
Alarm control
Alarm on (default)
Alarma apagada
19
Auto return to default display screen
Return to default display screen
(default)
If selected it will return to the main screen (Input voltage
/ Output voltage) after no button is pressed for 1 minute.
If selected, the screen will stay on the latest one selected
by the user.
20
Backlight control
Backlight on (default)
Luz trasera apagada
22
Beep when the primary energy
source is interrupted.
Alarm on (default)
Alarma apagada
25
Fault code record
Record enabled
Registro deshabilitado
26
Bulk charging voltage
If selected “User-defined” as 94 in the program, the charging voltage can be set, the setting
range is between 13,0V and 15,5V for 12V (*2 @ 24V, *4 @ 48V)
Maximum charging voltage for lithium
battery, when the battery voltage is
reached, it ends charging.
If selected “User-defined” as 94 in the program, the maximum charging voltage can be set
between 13,0V and 15,5V for 12V (*2 @ 24V, *4 @ 48V)
27
Floating charging voltage
If “User-defined” is selected as 94 in the program, the charging voltage can be set between
13,0V and 15,0V for 12V (*2 @ 24V, *4 @ 48V))
Low battery voltage under charge (for
lithium battery)
If “User-defined” is selected as 94 in the program, the charging voltage can be set between
12,0V and 14,0V for 12V (*2 @ 24V, *4 @ 48V)
04
Power saving mode
Saving mode disabled
(default)
If disabled, it doesn’t matter if the connected loads are high or
low, the on/off status of the inverter won’t have any effect.
Saving mode enabled
If enabled, the output of the inverter will disconnect when
there are no loads connected or when the loads are too low.
05
Battery type
Battery type
Fast voltage
Floating voltage
Gel U.SA.
14,0V
13,7V
A.G.M.1
14,1V
13,4V
A.G.M.2
14,6V
13,7V
Sealed lead acid
14,4V
13,6V
Gel euro
14,4V
13,8V
Open lead acid
14,8V
13,8V
Calcium
15,1V
13,6V
De-sulphation
15,5V
for
4 ho
urs
Lithium
When the battery voltage is 14,7V, the UPS closes the load
and reopens when the voltage reaches 12,5V.
User defined
If the option “User-Defined” is selected, the user can set the
type of battery in the program 94.
07
Auto restart when over temperature
occurs
Restart disabled (default)
Restart enabled
09
Output frequency
50Hz (default)
60Hz
Program
Description
Selection option
03
Input voltage range
Wide
Grid effective range:
Nominal output voltage: -23% a +15%
Narrow (default)
Grid effective range:
Nominal output voltage: -15% a +15%
