20
www.intipv.com
MANUAL DE USUARIO INVERSOR TECA LITIO / USER MANUAL INVERSOR TECA LITIO
Status
Battery voltage
LCD Display
Constant current mode /
Voltage mode.
<2V/cell.
4 bars will lash in turns.
2
-
2,083V/cell.
The bottom bar will be on and the other three bars will flash in
turns.
2,083
-
2
,167V/cell.
Bottom two bars will be on and the other two bars will flash in
turns.
>2,167V/cell.
Bottom three lines will be on and the first line will flash in turns.
Floating mode.
Totally charged.
4 bars will be on.
Load percentage
Battery voltage
LCD Display
Load > 50%
<1,717V/cell.
1,717V/cell
-
1,8V/cell.
1,8V/cell
- 1
,883V/cell.
>1,883V/cell.
50% > Load > 20%
<1,817V/cell.
1,817V/cell
-
1,9V/cell.
1,9V/cell
-
1,983V/cell.
>1,983V/cell.
Load < 20%
<1,867V/cell.
1,867V/cell
- 1
,95V/cell.
1,95V/cell
-
2,033V/cell.
>2,033V/cell.
In Electric supply (AC mode), it will present the following charging status of the battery:
In battery mode, it will present the following battery capacities:
Program
Description
Selection option
00
Exit setting mode
Escape
01
Output source priority: configure the
load power of the source priority.
Grid priority (default)
The grid will supply energy to the loads as a priority.
The battery will supply energy to the loads only when the grid
is not available.
Battery priority
The battery will supply energy to the loads as a priority.
The grid will supply energy to the loads only when the voltage
level of the batteries drops to a low-level warning voltage or
the setting point in the program is 12.
Load information
Indicates overload.
Indicates the load level by 0-24%, 25-49%, 50-74% y 75-100%.
0%-24%
25%-49%
50%-74%
75%-100%
