background image

162A

    

SAVE THESE INSTRUCTIONS

Page 23

(162)  MODEL SF15220 SAND FILTER PUMP  ENGLISH  7.5” X 10.3”  PANTONE 295U  08/29/2012

English

 MAINTENANCE

1. 

Before emptying your pool for long term storage, or relocation, be sure the water is    

 

directed towards an acceptable drain water receptacle away from the house. Check local  

 

regulations for specific directions regarding disposal of swimming pool water.

2.

  Switch off the unit, and disconnect power cord from electrical outlet.

3.

  When the pool is empty, disconnect all hoses from pump and plunger valves and  

 

 

remove the strainers/plunger valves from the pool wall.

4.

  In a counter clockwise motion unscrew the drain valve cap 

(9) 

from the drain valve

 

to  

 

thoroughly drain the tank. The drain valve is located at the bottom of the filter tank. 

5.

  Disassemble the pump motor from the tank base.

6.

  Leave sand filter pump pieces and hoses outside to thoroughly air dry.

7.

  Coat the following o-rings and washers with petroleum jelly for long term storage:

 

•  L-shape o-ring 

(11).

 

•  o-ring A 

(18).

 

•  Pump hose O-rings 

(22)

.

 

•  Strainer valve assembly step washers 

(23)

.

 

•  Flat strainer rubber washers 

(25)

.

8. 

Depress the 6-way valve handle and rotate so as to set the pointer on the valve top    

 

“N” position. This allows the water to drain from the valve. Leave the 6-way valve in this  

 

inactive position.

9.

  It is best to place all dry pieces and pump motor in the original packaging for storage. To   

 

avoid condensation or corrosion problem, do not cover or wrap pump motor with plastic bags.

10. 

Store the pump motor and accessories in a dry place. The storage's temperature  

 

 

should be controlled, between 0 degrees Celsius (32 degrees Fahrenheit) and 40    

 

degrees Celsius (104 degrees Fahrenheit).

POOL CARE & CHEMICALS 

• 

All pools require care to keep the water clear and hygienically clean. With proper 

 

chemical control, your filter will help attain this objective. Consult your pool supply dealer  

 

for instructions regarding the proper use of chlorine, algaecide and other chemical    

 

agents required for sparkling clear water.

• 

Keep pool chemicals away from children.

• 

Do not replenish chemicals in pool while pool is occupied. Skin or eye irritations could  

 occur.

• 

Daily pH checking and chemical treatment of the water is very important and cannot be  

 

overemphasized. Chlorine, algaecide and maintenance of proper pH levels are required  

 

when filling the pool as well as during the season. Consult your local swimming pool   

 

supply store for instructions.

• 

The season's first filling of the pool may have brackish water requiring extra water 

 

additives and extra filtering time. Do not allow swimming in pool until the pH level is 

 

balanced. Consult your local swimming pool supply store for instructions.

• 

Chlorinated water may damage lawns, gardens or shrubbery as children play in the pool  

 

and  splash water outside the pool. Lawn areas underneath the pool liner will be  

 

 

destroyed. Note that some types of grass may grow through the liner.

• 

Filter run time depends on pool size, weather and usage level. Experiment with various  

 

run times so as to produce clean clear water.

LONG TERM STORAGE & WINTERIZATION

CAUTION

Concentrated chlorine solutions may damage the pool liner. Always follow the 

chemical manufacturer’s directions, and the health and hazard warnings.

CAUTION

Allowing the water to freeze will damage the sand filter and void the warranty.  

If anti-freeze solution is needed, use only propylene glycol. Propylene glycol is 

non-toxic and will not damage plastic system components; other anti-freezes 

are highly toxic and may damage plastic components in the system.

Summary of Contents for SF15220




























Reviews: